K&F Concept Professional Heavy Duty Metal 360-градусный панорамный стабилизатор для наблюдения за птицами
Модель: KF31.033
As a straight forward Ball Head Mounting piece this is very well made and everything about it says it's a quality made item. It functions exactly as it should & I'm getting a lot of use out of it, It turns beautifully on the rotation collar, very smooth and not at all sloppy.. you can undo the locking knob right off and it will not suddenly go slack and lose the position you were at - it still turns very slowly.. good positive hold ( in a horizontal position ).
05.10.2021
Am glad to have chosen this head!
He is solidly made of metal, feels valuable and has a fine hammer finish.
A slight scratching during horizontal rotation has given itself right away.
Practical: adapter from 3/8" to 1/4" tripod thread is included!
Weight: 259.5g with adapter and mounting plate.
The screws turn well and are grippy.
I especially like the locking of the ball: which is designed as a clamp: it does not adjust when tightening and holds even heavy telephoto lenses bombproof with little effort.
The bubble level is practical and sufficiently accurate. Unfortunately, with a large SLR camera mounted, a vertical view from above for adjustment is obscured and you have to look at it from the side. This leads to reading errors in the longitudinal axis (only important for panning panoramas),
but the far more important horizontal alignment (horizon) is cleanly possible.
Clear buy recommendation, price / performance is top!
He is solidly made of metal, feels valuable and has a fine hammer finish.
A slight scratching during horizontal rotation has given itself right away.
Practical: adapter from 3/8" to 1/4" tripod thread is included!
Weight: 259.5g with adapter and mounting plate.
The screws turn well and are grippy.
I especially like the locking of the ball: which is designed as a clamp: it does not adjust when tightening and holds even heavy telephoto lenses bombproof with little effort.
The bubble level is practical and sufficiently accurate. Unfortunately, with a large SLR camera mounted, a vertical view from above for adjustment is obscured and you have to look at it from the side. This leads to reading errors in the longitudinal axis (only important for panning panoramas),
but the far more important horizontal alignment (horizon) is cleanly possible.
Clear buy recommendation, price / performance is top!
09.09.2021
This is an excellent piece of kit. However, the camera plate screw is just too short! The plate came loose far too easily when adjusting the camera angle hence four stars. Replace the screw with a standard thread length and you have a five star tripod ball head.
03.09.2021
I needed a couple of low profile heads to move from studio based filming to location shooting to move to arca compatible heads to save weight and ease transport and these were really impressive - I've since ended up buying bags, tripods, light stands and small lights from K&F having been impressed with products and packaging and everything has been excellent
03.08.2021
Colours unnecessary. Degree scale so small as to be pointless.
Lightweight only. Ball very small. Fitted to Manfrotto 243 window clamp.
Lightweight only. Ball very small. Fitted to Manfrotto 243 window clamp.
29.07.2021
To whom it may interest: They do not state this in the specs, but it is Arca-Swiss Standard, so suitable for other plates with 38mm (1.5") of a width.
30.06.2021
Bought as a present for my wife - she loves it and works very well on the Manfrotto tripod
18.06.2021
The varied weight difference between Amazon ad and it's manual and the loose bolt at its base that makes the vertical arm wobble up and down
13.06.2021